Getting Started With Clik Jobs
This article will show you how to set up Clik Jobs and link it with Clik Service.
Before you can start setting up, you need to check how many licenses you have for Clik Jobs. You can do this in Clik Service by going to Help > About, where it will show you how many licences you have for each Clik product you use.
This is how you set up which staff members can use Clik Jobs.
First, open Clik Service and go to Settings > Staff.
Select the staff member who is going to be using Clik Jobs from the list on the left.
On the ‘Login/Privileges‘ tab, make sure ‘Allow Login‘ is ticked.
You can also change their password here, if needed, by clicking on ‘Change Password’.
Next, go to the ‘Clik Jobs’ tab and tick allow for the permission ‘Can use Clik Jobs‘.
Next, you need to go to the Clik Jobs setup wizard to configure what your engineers can synchronise with Clik Service.
Go to Settings > Settings.
Navigate to Modules > Clik Jobs > Setup Wizard.
Click on ‘View Staff‘ to edit who has access to Clik Jobs or ‘Configure Engineers‘ to make customers, sites, equipment and products available to specific engineers if required.
Find links below to support articles on how to do this:
Under the ‘Engineer Options’ heading, you can select each engineer to force complete tasks or sync by default. Tick the box next to each option to set it up.
Click ‘Next‘ and Clik Jobs will start syncing data to the cloud.
On the next screen, you will then be able to schedule automated syncs with the cloud. For example, you could set it to sync every 10 minutes between 8am to 8pm.
Once you’ve set this up click ‘Next‘.
You will now be given a pin code, which you should take note of. When an engineer first logs into Clik Jobs, they will need to enter this code.
Then click ‘Finish‘.
You are now ready to sync job sheets between Clik Service and Clik Jobs.
Syncing Jobs Between Clik Service, Clik Jobs and the Cloud
Once you have created a job you will need to add the engineer to it.
To do this, open the job sheet in Clik Service.
Click on the ‘Engineers‘ tab then click on ‘Add‘.
Choose your engineer and date/time from the schedule then click ‘OK‘.
The engineer’s name will now be added to the job.
If the engineer is set to sync by default, then it will sync at the next scheduled time. However, if they’re not, you will need to tick the ‘Sync‘ box.
Click ‘Save & Close‘ in the top right of the job sheet and the job will sync at the next scheduled time.
Pushing a Job to the Cloud
Make the selected job available in the cloud by clicking on the job sheet clicking on ‘Sync Job’.
The engineer can then download the job when required. This will also push any other jobs in the queue.
Find more information on syncing jobs here.
How to Bring Job Sheets Back Into Clik Service
When a job has been uploaded by an engineer and synced back into Clik Service it will appear in the queued jobs tab in the jobs module.
Go to Jobs > Queued Jobs. In here you may see jobs from the last scheduled auto-sync. To get the latest jobs, click ‘Sync with Cloud‘.
Once the jobs are down, double-click on any job and a window will appear with the original job sent to the engineer with the changes made by the engineer.
You can choose to accept or reject individual parts of the engineer’s job by using the ‘Accept‘ or ‘Reject‘ buttons.
If you want to accept all the information sent back, click ‘Accept Queued Job‘.
Any changes made on the original job since it was sent to the engineer will be lost.
Once you have accepted the changes, the job will be updated and deleted from the queued job list.