Create, Complete and Print PAT Certs (v1)
This article refers to NICEIC Cert Software V1 (2008-2018).
Create a PAT certificate
Select the ‘PAT Certificates‘ tab then select ‘New PAT‘.

This will bring up the PAT certificate. It works in a similar way to the NICEIC certificates, so you can select the clients, sites, engineers and contractor the same way.

Adding Appliances and Tests
Go to the ‘Appliances & Tests‘ tab within the certificate.
Select ‘Add new appliance test‘.

Now click on ‘Select appliance‘.

From this section, you can either select a previously created appliance or add a new one.
Click ‘New Appliance‘ if you need to create a new one.

Fill in the test details and click ‘Ok‘. The test will then be listed within this screen.
Completing and Printing
Once you are happy that everything has been fully filled out, you need to mark the certificate as complete.
When you’re ready to print the certificate, go to print, then original. This will give you the print preview of the certificate.
How To Save As PDF
Before opening a certificate, right-click on it, as seen below, and select ‘Save as PDF‘.

This should then bring up a window asking you where you would like to save the certificate.
Select the folder you want to save the PDF certificate and click ‘Save‘.
How To Create A PAT Certificate From An Existing Certificate
Before opening a certificate right-click on it, and select ‘Create new certificate from selected (copy)‘.

This will add a new PAT certificate with the copied information into this list.